DSSSB LDC Typing Test
Free DSSSB LDC / JSA skill test practice with custom passages and 10-minute runs.
Quick Tips for DSSSB LDC Typing
- Practise the full 10 minutes — DSSSB measures sustained speed, not a quick burst
- Backspace is allowed, but minimise corrections — each one eats into your net WPM
- Check the Errors section after every attempt to spot your most-mistyped words
- Aim for 40+ WPM in practice — exam nerves cause a 4–6 WPM drop for most candidates
About DSSSB LDC Typing Test
The Delhi Subordinate Services Selection Board (DSSSB) conducts recruitment for clerical and secretariat posts across Delhi government departments, including the Lower Division Clerk (LDC) and Junior Secretariat Assistant (JSA). Candidates shortlisted through the written examination must clear a qualifying typing skill test that requires a minimum of 35 words per minute in English (or 30 WPM in Hindi) over a 10-minute session. DSSSB uses a paper-to-screen format — the passage is given on paper and re-typed onto the computer — and, unlike SSC exams, the backspace key is generally permitted. This free practice tool provides real exam-style English passages at Easy, Medium, and Hard difficulty so you can build the speed and accuracy needed to qualify.
DSSSB LDC Typing Test Requirements
- Minimum typing speed: 35 WPM in English (30 WPM in Hindi)
- 35 WPM English ≈ 10,500 key depressions per hour; 30 WPM Hindi ≈ 9,000 KDPH
- Test duration: 10 minutes
- Backspace key is generally permitted during the exam
- Format: paper-to-screen — the printed passage is typed onto the computer
- Speed is measured as net WPM — gross speed minus deductions for errors
- The skill test is qualifying in nature and does not add to your merit score
- Posts covered: LDC, Junior Secretariat Assistant (JSA), Patwari, and similar clerical roles
How to Prepare for DSSSB LDC Typing Test
The 35 WPM bar is achievable with focused practice over 2–3 weeks. Here is a structured approach:
- Practise the full 10-minute duration — short sessions don't build sustained accuracy
- Start with Easy passages — build rhythm and reduce hesitation before increasing speed
- Toggle backspace off for half your sessions — forces cleaner first-keystroke accuracy
- Progress to Medium then Hard difficulty — once you consistently score 38+ WPM on Easy
- Target 40+ WPM in practice — your exam score will typically be 4–6 WPM lower under real conditions
DSSSB LDC vs SSC CHSL vs CPCT — Typing Test Comparison
All three are government typing tests for clerical posts, but they differ in important ways:
- Speed requirement: DSSSB — 35 WPM; SSC CHSL — 35 WPM; CPCT — 30 WPM
- Duration: DSSSB — 10 min; SSC CHSL — 15 min; CPCT — 15 min
- Backspace: DSSSB — allowed; SSC CHSL — NOT allowed; CPCT — NOT allowed
- Exam body: DSSSB (Delhi); SSC (Central); MAP_IT (MP state)
- Format: All three are paper/screen re-typing skill tests, qualifying in nature
If you are preparing for DSSSB, also try the SSC CHSL typing test with backspace disabled — clearing that stricter format means you are well above the DSSSB requirement.
Frequently Asked Questions
Is a typing test required for DSSSB LDC?
Yes. A typing/skill test is mandatory for the Lower Division Clerk (LDC) and Junior Secretariat Assistant (JSA) posts recruited by the Delhi Subordinate Services Selection Board (DSSSB). The typing test is qualifying in nature — you must clear it to be considered for appointment, but it does not add marks to your final merit. Candidates are shortlisted for the typing test on the basis of their Tier I / written examination performance.
What is the required typing speed for DSSSB LDC?
The minimum typing speed required for DSSSB LDC / JSA is 35 words per minute (WPM) in English or 30 WPM in Hindi. A speed of 35 WPM in English corresponds to roughly 10,500 key depressions per hour (KDPH), and 30 WPM in Hindi corresponds to about 9,000 KDPH, calculated on an average of 5 key depressions per word.
How long is the DSSSB LDC typing test?
The DSSSB LDC / JSA typing test duration is 10 minutes. You are given a printed passage on paper and must type it onto the computer screen within the allotted time. Practising the full 10-minute duration builds the stamina needed to maintain a steady speed and accuracy from start to finish.
Is backspace allowed in the DSSSB LDC typing test?
Yes. Unlike SSC and High Court typing tests, the DSSSB typing test generally allows the use of the backspace key to correct mistakes. However, every correction costs time, so over-relying on backspace will lower your effective speed. Our tool lets you toggle backspace on or off so you can train both ways and reduce your dependence on corrections.
What is the format of the DSSSB typing test?
DSSSB uses a paper-to-screen format: the official passage is provided on paper and you re-type it onto the computer using the keyboard. Speed is measured as net WPM — your gross typing speed minus deductions for errors. Accuracy matters as much as raw speed, since uncorrected mistakes reduce your net word count.
Which posts require the DSSSB typing test?
The typing/skill test applies to clerical and secretariat posts under DSSSB, including Lower Division Clerk (LDC), Junior Secretariat Assistant (JSA), Patwari, and similar posts across Delhi government departments, autonomous bodies, and local bodies. The exact speed requirement (English or Hindi) is specified in the official recruitment notification for each post.
How can I prepare for the DSSSB LDC typing test?
Practice daily with real exam-format passages in full 10-minute sessions. Start on Easy difficulty and aim to consistently cross 38–40 WPM before moving to Medium and Hard. Track accuracy alongside speed — a high WPM with many errors still fails the net-speed requirement. Two to three weeks of focused daily practice is enough for most candidates to clear the 35 WPM bar comfortably.